Video Script:
Hey Youtube, this is Adam at DowntownVapes. I’m gonna show you how to build the Moonshot RTA.
Now first, you have to unscrew the Top Cap. Then, you unscrew the base,the tank and the glass.
Then you have to unscrew the chimney. And the deck, just, you can pull it right out.
Now once you do all that, just take your deck. That’s two post, positive negative. And your two air holes.
Built some claptons. Just gonna throw them in there. That’s wide, so you have to make sure your leads are long enough to fit in there.
Now once you put it in there you just rest it inside the the air hole. Just right there.
Same thing with the other one.
Once you’ve done that, just screw down your post.
So once you screw them down, just take your bit. Just treat it like a normal coil. Pull it.
And once you’ve done that, you have to clip your leads. Just like that.
Okay, so we grabbed our Coil Master here.
Just so it’s easier for me to show you guys how to install the coils properly and build this tank.
As you can see, the deck is completely suspended in there. Just move it around.
Which makes it pretty hard, that’s why which is exactly why we grabbed the Coil Master.
Now what I’m gonna do, is I’m just gonna fix them up real quick.
What really makes this thing hard, is the fact that it is suspended in there and pulling the coils and trying to fix them is just really hard. So you gotta be careful if you don’t, like, bended or break your coil. Have it reading some weird numbers.
But because the deck on this is just moving around very easily, you have to screw the chimney back on in order to get it to fire. So you can get everything heating up evenly.
Okay, So I unscrewed the chimney again. Just to show you guys one thing. There’s little groves in there, right?
Now, when you’re screwing this on. You have to make sure that these little groves line up with, you know, the airflow down here. Okay.
They will catch your positive and negative post. You don’t want that cause then you’re gonna short-out your RTA. So when you put it on, just make sure you have this groves lined up with the airflow. Just like that. So it’s not gonna move.
Okay so once you’ve screwed this back on, with all the groves in place. You wanna make sure you adjust the coils again, and make sure that they’re not touching the sides of the chimney.And that they’re sitting right over the air flow.
Okay. So what you’re gonna do is, you’re gonna fire just like any normal RDA or RTA. Make sure everything’s heating up evenly.
Okay,so now that we have the coils firing evenly. I think we’re ready to wick this.
To wick this, you’re gonna have to unscrew the chimney again. And, so just wait for your coils to cool down before you do that.
Okay, so now that the coils have cooled down. Well,I have unscrewed the chimney.
So what you gonna do is take your cotton of choice. In this case we’re using Japanese cotton. And you kinda want to cut it in a way that it’ll fit nice and snug in your coil. So for this, I’m using bigger pair of scissors but later on I’m gonna use this tiny little ones to get everything nice and clean. So what I like to do is cut a little piece off the top there, just so it makes it easier to pull through. Then you just take the tip, twist it, pull it through.
Now that we thread the cotton. You wanna make sure to line your groves back up with the airholes. But you have to kinda pull the cotton up and slide the chimney back down. Okay, so once you’ve done that, just crew it back in.
Now what you gonna want to do is cut the cotton right about there. And just wick it like normal.
There you go, it’s all wicked up.
So now that it’s all wicked. I’m just gonna prime it, and put it back together and then we’re gonna vape on it.
So let us put it back together.
First, you wanna put the glass back on, and then screw down the top of the chimney. Make sure all the threads are nice and smooth. You don’t wanna cross threads. Okay, so now we’re gonna fill the tank. So it’s top fill,so you got this two little holes here. All you gonna do is stick your nozzle in there and squeeze really hard.
Make sure you won’t do that.
Okay and once you’re done with that, just screw your top cap back on.
And then, I’m gonna unscrew the Moonshot from the Coil Master. And I’m gonna see how she vapes.
Okay, so now we’re gonna vape on the Moonshot RTA and see how we did. It’s pretty good. I like that.
8 out of 10. Love this tank.
Thank you for watching our video guys.
Hope you enjoyed it. This was pretty fun to build on. I would rate this probably a 6 out of 10 on difficulty,I guess. But overall, it’s doable. Pretty easy, and I like the way it vapes. If you wanna pick one up, we are carrying them in our store and yeah, just make sure you like and subscribe.
