DTVapes Blog

  • Home
  • Back To Our Store
  • Posts
  • Reviews
  • Videos
  • Learn
  • Connect With Us
You are here: Home / Reviews / Video: IPV3Li Review by DTV

Video: IPV3Li Review by DTV

October 11, 2015 by admin

https://dtvapes.com/ipv3-li-box-mod

Video Script:

What’s up guys, it’s Chadd from DownTown Vapes.

Just doing a quick tutorial on the IPV3Li.

So right here, we have this nice fancy box, look at this cool little designs on the box, really neat.

IPV3 is in there nice and tight,which i like.

So, here’s the IPV3 Li.

I like it because, on the other ipv3s doesn’t have a sliding door, the other ipv3s actually dont even have magnets they just have screws. It’s gonna be a bit of a pain sometimes. Also you’ll notice the firing button, the firing button is a lot bigger. It’s a lot more smooth,fits your thumb really well so you are not using the side of you thumb. Like i noticed i’ve been using on the IPV3.

So some great things about this, right out the box, it’s 165 Watts. The temp control does not work unless you update it. Which we’ll have another tutorial on how to update the IPV3, after this one.

It’s great to buy, so I have one right here. All stickered up by e-liquids by dtv. I have mine, it actually goes up to 200Watts, come over here and check that out. So, 200Watts, reading at 0.13. I’ll show you guys how this heats up at 200Watts. So right here i got some ” Conviction – JOYRIDE”, nice little blood orange, whitechocolate espresso mix, very tasty . So if you guys wanna come a little closer, watch this thing heat up. As you can see, a lot of vapor production at 200Watts. Actually hit this at 200Watts for you guys, to show you the vapor production. Lets get my top cap, which i lost over here.

So, 200Watts, wish me luck. it’s a very warm vape at 200. It’s not too bad, it’s not like I was choking. Very flavorfull.

So I own an IPV3 Li myself, mine’s pretty uh, i got some stickers on mine too. Probably my favorite part about it’s the touch sensors actually work. I know that the regular first IPV3, the touch sensors do not work, they actually fixed that. So I’ll show you how to turn it on, and how it works.

I’m gonna go ahead and hold the fire button and the plus button down to turn it on. So “touch on”, and it’s touch sensor is right here so, you gotta make sure that the screen is actually on, that’s actually the safety thing , so if it’s on ur pocket or something and your screen’s not on and you touch the fire button it’s not gonna work,so. And so to turn it off, i’m just gonna go and hold the fire button in and then the minus button and “touch is off”.

So, like what I was saying , fresh out of the box the IPV3Li is 165Watts temp control doesnt really work without the update so make sure you update it as soon as you get the box, if you wanna use the temp control mode. I’ve noticed fresh out of the box, when i first Iought mine I was wondering what the heck happened to it, why doesn’t the temp control work. See I just upgrade it and it actually will work for you. I’m actually gonna show you guys how to switch over to the setting.

So there’s power mode,gonna click it five times and then scroll through the menu options. You’re gonna use this button right here, so I’m gonna click it once, that’s power mode, which would be wattage. Either exit or go back to the system. So you wanna go to the power mode. You wanna switch it down to Joules which is your temp control. You can either choose from between farenheit or celsius. It maxes out at 572 degrees Farenheit. and then you can actually choose between nickel or titanium. So let’s just go nickel, exit, down or up to turn it off, and then you’re back to screen.

So, with Nickel, it only goes up to 50Joules. With Titanium, it would actually go up to 100Joules. So I’ll show you that real quick. Joules, Farenheit temp, choose the Titanium, and then watch it sky rocket.

So, there you go, Titanium 100Joules, 572 degrees Farenheit, But I do not have temp control coil on me. So let’s switch it back to Wattage. And I’m so happy I dont know why.

Alright, so, it turns out, I do have my tank for temp control. So this is an ARCTIC, one of the original ones. I actually drilled it out, so there’s little more airflow. I love Airflow, gives a little more vapor.

And as you can see, down here in Downtown vapes, we have the coils for the ARCTIC. So it’s easy, 180Watts, I’ll switch it over to temp control in two seconds. Okay, so, what I’m gonna do, take this atomizer off.

Alright, so, temp control, this is how you set it up.

So I’m throwing the tank right there now. Sitting on there nice and flush. I’m going to press the button five times. Go over to “power” switch to Joule mode, Farenheit, so this box actually will tell you the tempreture you wanna be at. So, it says 212-572F. I’m just gonna turn down a little bit. Coz you don’t really need it that high. Well, we’ll go like 545F. I’m gonna switch over to nickel coz this is a nickel coil. Go to off,and then set your Joules to whatever you want.So this is an ARCTIC, the original Arctic coils, we’re at 0.2 and go about 47 Joules right now. Next thing you want to do is set your resistance.

So to set your resistance, you hold both POSITIVE and NEGATIVE down. Both your plus and minus, hold that down. It should set it. So you want it to be nice and cool. It’s running at 0.244. So you can see, and then you’re set. Once you’re set, we regulated it how we want.
And it would give you something like that.

I can literally go through this whole tank in about 30 seconds. And it’s just with the temp control. I’ll never burn out the coil, i’ll never get like a dry hit. Most it will do is it will start gurgling, because there’s just so much liquid going in and out of the coil that will actually start gurgling a little bit. But not too bad, it works really well.
I’ve noticed ,myself, temp control works best on tank.

Right now, I’m gonna turn it up all the way to 50Joules. I’m gonna change the temperature to 572F,the max. So turned it all the way up. Nickel, off, still it would be at 0.24. Great vapor production. And there’s temp control. IPV3 Li temp! Works great!

Yup, I love it.

Another cool feature, it still got its 5memory settings for, you know, easy access.
(Let me see your clouds)

So I got some cap and coils in here, they’re reading at 0.19 ( can we see them ).

I got it at 98Watts (take your cap off).

Those are my coils. (ooohhh )

So 98Watts and I am Vaping “the Downside by Schwartz” a blueberry greek yogurt and it’s delicious.

I won’t give up my IPV3Li for anything, the only thing that I can say bad about it is, if you’re having it on 200Watts and you’re battery is at 3/4ths full it’s gonna tell you to check the battery and you can’t hit it. It’s the only bad thing. Other than that, I love it. I’d eat it.

PDF Version

Share on Facebook Share
Share on Twitter Tweet
Share on Google Plus Share
Share on Pinterest Share
Share on Linkedin Share
Share on Digg Share

Filed Under: Reviews, Videos

Social

Facebook 2900+Fans
follow
Youtube 15+Subscribers
subscribe
Twitter 160Followers
follow
google+ 1000+Followers
follow
Instagram 350+Followers
follow

How To Vids:

Video: Moonshot RTA building tutorial

Video Script: Hey Youtube, this is Adam at … [Read More...]

Video: Vaping 101 With Matt At DownTownVapes

Video: Vaping 101 With Matt At DownTownVapes

Video script: What’s up everybody, it’s Matt … [Read More...]

Video: Tornado tutorial by DTV

Video: Tornado tutorial by DTV

Video Script: Hey this is Truder, over here at … [Read More...]

Recent Posts:

Is the vaping industry going to die?

Is the vaping industry going to die?

DTV friends today I want to talk about the FDA … [Read More...]

Meet Team DTV Video: Justin Falowski

Meet Team DTV Video: Justin Falowski

So who are you and what do you do here? I am … [Read More...]

Meet Team DTV Video: John Brandes

Meet Team DTV Video: John Brandes

My name is John Brandes, I am the CEO of Downtown … [Read More...]

Meet Team DTV Video: Ryan Steets

Meet Team DTV Video: Ryan Steets

So what’s your name and what’s your position at … [Read More...]

Copyright © 2022 · Magazine Pro Theme on Genesis Framework · WordPress · Log in

X
Share this
Subject:
Message: